3-axle trailer The HTD
The standardRugged, reliable, economical
Drawbar with 8° inclined towing ring Ø 40 mm, height-adjustable silent bushes.
Solid welded construction of turntable with large slewing ring
Solid, welded frame made of high-strength, fine-grained steel and full-length cross-beams for maximum stability, wheel recesses above the rear wheels, front corners chamfered, climbing rails on the ramp at the back for maximum safety during loading and unloading. Straight or cranked cargo bed.
Chassis and attachments are hot-dip galvanised in an immersion bath, optional excavator-style stacker.
Floor made of 50 mm softwood planks.
5 pairs of 10 t lashing points recessed in the platform floor.
Air suspension aggregate that can also lift and lower the rear axle.
Single-section, hot-dip galvanised drive-on ramps, laterally movable, directly acting, fixed spring lifters for convenient operation, optimally secured by a turnbuckle and latch.
Flatbed axles with closed drum brake.
EBS braking system, spring-loaded parking brake.
Light clusters, impact-proof and secured against vibration, protected in the underride protection, 24 V, 15-wire connection cable.
Foldable lateral impact protection, contour markers at the sides and rear.
- Front half-shell mudguard with anti-spray system in front,
- steel mudguard with anti-spray system at the rear
2 wheel chocks with retainers.
A classic product – rugged, reliable, economical. The cranked cargo bed area serves as a stop for wheeled or tracked vehicles. The cargo rests against a stop and is easier to secure. You can reduce the already low load height even more by using a cargo bed which can be lowered by air-suspension.
|Permissible gross weight in kg||24000* / 30000**||Body dimensions in mm||10780 x 2540 x 3780|
|Load capacity in kg||17600* / 23600**||Drive-up angle||10 °|
|Internal dimensions in mm||6500 x 2520||Tyre size in inches||12-fach 235/75 R17,5|
|Load height in mm||890|
* Permissible gross weight for distributable load without special permit ** Permissible gross weight for non-distributable load with special permit in accordance with § 70 STVO (German Road Traffic Act)
Subject to technical modifications. All specifications are approximate values and relate to a series vehicle without accessories. Additional equipment will change both the empty weight and the load capacity!
What can I transport with the Humbaur HTD trailer?
Mobile excavators and wheel loaders
Mobile excavators and wheel loaders up to a weight of approx. 17.6 to 23.6 tonnes, depending on the model.
Crawler excavator with a weight up to approx. 17.6 - 23.6 tonnes, depending on the model.