The most important features of the HS 10t models
HS 10t
Easy to use.
- Steplessly adjustable draw tube
- 15-pin connector
HS 10t
Secure transport.
- ABS brakes as per ECE Guidelines
- Reinforced 12 metric ton gearbox support spool
Your package of heavy-duty benefits from Humbaur
- Tyre pressure monitoring system as standard on all heavy-duty trailers including Auto-Locate function for up to 12 wheels per trailer
- Standard EBS brake system with spring brake for better braking
- Full LED rear lights as standard for better visibility and a modern design
- Flashing side marker lights as standard for better visibility
- Treated/varnished wood as standard for visual enhancement and protection against environmental factors
- Rear apron fitted as standard to prevent spray mist in rainy weather
Additional equipment features
Compressed air brake with release valve, automatic load-dependent ALB brake, connecting lines with couplings in red/yellow, 24 V ABV system with spinal parking brake
Tow bar with screw drawbar ring Ø 40 mm, galvanised, can be steplessly adjusted via the crank handle
- 15-pin connector
- 24 V lighting system with multi-chamber tail lights, optimally protected, and LED lateral lights
- 2 pairs of lashing rings 6 t, set into bridge floor
- 6 pairs of lashing points 2 t in the outer frame
- Solid galvanised steel ramps, laterally adjustable, made of galvanised profile gratings (HS 89) and covered with wood (HS 10), pressurised gas ramp lift
- 2 folding and telescopic supports on the ramps
- Stable and galvanised welded construction for optimal stability and safety. rigid, load-bearing, galvanised front and side walls
- Flooring made from 40 mm softwood planks
- Axle with drum brake, no-maintenance parabolic suspension for optimal power compensation
- Robust, hot-dip galvanised steel mudguards with anti-spray system, side impact protection, side and rear contour markings
- 2 wheel chocks with holder
- Reinforced 12 metric ton gear-supported jack with power and fast gears, 2x support, can be folded and telescoped on the ramps
Models
-
HS 106020 BS Fräsentransport
with reinforced base, conveyor support and extended drawbar
Gross weight:11 900 kgLoad capacity:8 560 kgInner length:6 000 mmInner width:2 010 mm -
HS 106020 BS
somewhat longer, but with somewhat lower payload
Gross weight:11 900 kgLoad capacity:8 950 kgInner length:6 000 mmInner width:2 010 mm -
HS 105020 BS
somewhat shorter, but with higher payload
Gross weight:11 900 kgLoad capacity:9 500 kgInner length:5 000 mmInner width:2 010 mm -
Compare models
| HS 105020 BS | HS 106020 BS | HS 106020 BS Fräsentransport | |
| Total permissible weight in kg | 11 900 | 11 900 | 11 900 |
| Overall dimension in mm (LxWxH) | 7090 x 2550 x 3090 | 8090 x 2550 x 3090 | 8420 x 2550 x 3300 |
| Payload in kg | 9500 | 8950 | 8560 |
| Load height in mm | 705 | 705 | 705 |
| Ramp slope in degrees | 16 | 16 | 15 |
| Tyres in inches | 215/75 R17,5 | 215/75 R17,5 | 215/75 R17,5 |
Subject to technical modifications. All dimensions are approximate values and refer to the standard vehicle without accessories. Additional equipment changes both the unladen weight and the load capacity!
All information is provided without guarantee. Subject to change without notice. Images may show optional equipment. Accessories are available as an option.