The most important features of the HTK 18t models
HTK 18t
Easy to use.
- Steplessly adjustable draw tube
- 15-pin connector
HTK 18t
Secure transport.
- With drum breaks
- Pneumatic suspension with shock absorbers, electronically controlled for tipping stabilisation
- 2 wheel chocks with holder
- Reinforced 12 t gear-supported jack
Additional equipment features
Axle with drum brake, no-maintenance parabolic suspension for optimal load compensation
EBS pressurised air bakes for pneumatic suspension, ALB brake power regulator for parabolic suspension, connector hoses with red/yellow couplings, braking system with spring-loaded parking brake, standard for EBS
Extra-wide single tyres for low ground pressure
Central bar with 40-mm-diameter screw towing eye, galvanised, can be infinitely adjusted via the crank handle
- 24V lighting system with multi-chamber tail lights and LED lateral lights
- 15-pin connector
Lashing points 3 t set into the bridge floor (5 pairs / 5.0 m; 6 pairs / 5.5 m)
- Solid, welded and galvanised frame for optimal stability and safety; bridge floor made of 4 mm fine-grain steel, non-interchangeable rocker bearings
- Motorised hydraulic three-way tipping system, five-level cylinder with lift limiter
- Mudguards with anti-spray mats
- 2 wheel chocks with holder
- Reinforced 12 t gear-supported jack with load and overdrive speed
- Laser-welded quality steel side walls 600 mm, can be folded down on the sides and at the back, removable and oscillating with central locking mechanism, removable front wall
- Bridge frame hot-dip galvanised with longitudinal, lateral and diagonal braces for exceptional stability and concentrated loads
- Side walls primed and lacquered with high-quality 2K paint for optimal corrosion protection, sealed hollow spaces, your choice of single-colour paint in RAL
Models
Compare models
| | HTK 185024 | HTK 185524 |
| Total permissible weight in kg | 18,000 | 18,000 |
| Overall dimension in mm (LxWxH) | 6,950 x 2,550 x 1,710 | 7,450 x 2,550 x 1,710 |
| Payload in kg | 13,800 | 13,400 |
| Load height in mm | 1,135 | 1,135 |
| Tipping slope (to side/back) in degrees | 45/48 | 45/48 |
| Tyres in inches | 435/50 R19.5 | 435/50 R19.5 |
Subject to technical modifications. All dimensions are approximate values and refer to the standard vehicle without accessories. Additional equipment changes both the unladen weight and the load capacity!
All information is provided without guarantee. Subject to change without notice. Images may show optional equipment. Accessories are available as an option.